• Home

    Reclaimed Barnwood For Sale

    Many joints, mortice and the long-grain to long-grain bonding area The second factor is joint preparation. The mating surfaces must be smooth and clean (no dust or oil). They must also be close~fitting: None of the glues shown in photo 3 have gap-filling properties. Other factors are the amount of glue (most DlY’ers use far too much), the spreading method (use an artists brush), the open time before clamping, clamping pressure and clamping time. Be sure to follow the manufacturers instructions for best results. All surfaces of a joint must be pulled up snugly. Make a special point of applying pressure across the long-grain contact area of a joint. Clamps…