When choosing a drip irrigation valve for your landscape, you should consider the soil type and your plants. Different soil types require different levels of water absorption. Also, mature plants may require more water. You may need to add more drippers to cover the roots of these mature plants. In most cases, a 3/4” anti-siphon valve will provide enough water for most landscapes.
In-line drip tubing
If you’re planning on installing a drip irrigation system, you may be wondering which components you’ll need. Depending on the water quality, you can use different components. It would be best if you also considered the types of plants you’ll be watering. A good rule of thumb is to take a drawing of the area where you want to install the irrigation system and mark the distances between the plants so you can determine what types of tubing and fittings you’ll need.
Drip tubing comes in a variety of sizes, including 1/4-inch and 1/2-inch. It is designed to be used in large-area planting and ground covers. Its emitters allow the user to adjust the amount of water used for each individual plant. Some varieties also come with bug plugs that prevent bugs from crawling into the tubing.
Angle valves
Angle valves combine a pipe elbow’s functionality with a valve’s functionality. The term “angle” originates from its rounded body, which impedes or permits water flow by rotating the disc or plug. Angle valves are ideal for drip irrigation and other applications in which pressure control is essential.
There are many different types of angle valves available, each with its characteristics. One type is known as a rising stem, bronze angle globe valve, which is ideal for in-ground applications. This type of valve has a cross-type operating handle.
Filter Sentry
The Filter Sentry drip irrigation valve from Hunter is a high-performance solution for commercial and high-pressure systems. With a fabric-reinforced EPDM diaphragm and flow control, this valve can handle up to 220 PSI and free your valve from debris. In addition, it is simple to maintain and comes with standard tools.
The Filter Sentry drip irrigation valve is available in two different sizes. One is a 2″ ICV inline valve that can handle up to 220 PSI. The other comes in a 3” version ideal for lake, pond, or gray water systems.
MHT
When selecting drip irrigation valves, choosing the right type is essential based on your needs. MHT and FHT are two types of threads used on drip components. PT and HT stand for Pipe Thread and Hose Thread, respectively. Most drip irrigation components are designed to use HT threading. Additionally, the M or F indicates whether the component is in-y or out-y.
Hose threads are usually 3/4″ in diameter but vary from manufacturer to manufacturer. Pipe threads are generally between 1/2″ and 1″. Using the correct adapter for the hose and pipe threads is important.
